Default Language Pack (us-en)
Alpha trooper Metal Stefan Kit Worker
3W-SB-001
Alpha trooper Metal Stefan Kit Worker
Worker Metal 'Elite Alpha trooper' Stefan Kit! Quality, strength and performance! Worker have put together this exceptional drop in kit for the Elite Alpha trooper. Metal barrel, metal dart gate adaptor, metal pusher/bolt and 9kg spring. This is a short dart/stefan kit. Only short dart/stefans can be used.
Kit includes all metal components where possible as pictured for strength and durability:
- Metal barrel
- metal dart gate adapter
- metal pusher/bolt
- 9kg spring
- Associated fixings, O-rings, spares etc.
Blaster and other accessories are not included.
Reports say that the plunger head needs to be filled in 1-2mm with hot glue or similar to give the kit extra 'throw length' to enable it to catch when priming. We'd suggest putting it all together and if you then find it is not catching properly then try filling the plunger head a little.
Note: Listing is for 1x Metal Alpha trooper Stefan Kit only. Blasters and accessories are for display purposes only.
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use approved foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
Kit includes all metal components where possible as pictured for strength and durability:
- Metal barrel
- metal dart gate adapter
- metal pusher/bolt
- 9kg spring
- Associated fixings, O-rings, spares etc.
Blaster and other accessories are not included.
Reports say that the plunger head needs to be filled in 1-2mm with hot glue or similar to give the kit extra 'throw length' to enable it to catch when priming. We'd suggest putting it all together and if you then find it is not catching properly then try filling the plunger head a little.
Note: Listing is for 1x Metal Alpha trooper Stefan Kit only. Blasters and accessories are for display purposes only.
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use approved foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
200.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
(write review)
3/5
Works great with a little modification (BE CAREFUL WITH SLAM-FIRE)
You need to do some modification to get the catch to work - as is stated in the description, but once it does it hits like a stock nexus/aeon pro. However there is an issue with the stock alpha trooper where it will fire without a trigger pull due to the slam fire mechanism, this kit seems to compound this a bit; though it's more an issue with the blaster than the kit you must carefully close the breech after priming to avoid a 140fps dart firing off unintentionally.