Default Language Pack (us-en)
Sledgefire Singled Shell 17/32
Upgrade your plain old Sledgefire to a "Ultimate Sledgfire". This 3d printed 'Sledgefire Singled Shell' uses 17/32 brass tube as a single barrel, resulting in a huge jump in dart velocity using a decent upgrade spring. The Shell utilizes the existing rubber seal and holds the 'air restrictor' open, so there is very little modification to be performed. We have seen slight increases in performance when the air restrictor is removed, it is up to the end user if they wish to do this. Make sure that the existing rubber seal is not damaged.
What you will need:
The 17/32 brass tube can be set at different depths inside the Shell. For example if you are using full length darts, you will need to set the tube lower to enable a full length dart to push in. Short darts you can set the tube high up and close to the top of shell (see picture). You may need to glue the tube in the shell to ensure no movement.
This product is designed / printed / stocked in house and can be dispatched ASAP.
NOTE: Listing is for a Sledgefire Singled Shell only, blasters and accessories are for display purposes only.
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
What you will need:
- This BlasterTECH 3d printed Sledgefire Singled Shell
- 150mm length of 17/32 brass tube (comes in 300mm length. (You can make 2x Slegefires))
- C836 spring (or another upgrade spring of your choice)
The 17/32 brass tube can be set at different depths inside the Shell. For example if you are using full length darts, you will need to set the tube lower to enable a full length dart to push in. Short darts you can set the tube high up and close to the top of shell (see picture). You may need to glue the tube in the shell to ensure no movement.
This product is designed / printed / stocked in house and can be dispatched ASAP.
NOTE: Listing is for a Sledgefire Singled Shell only, blasters and accessories are for display purposes only.
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
40.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
(write review)
5/5
Wow
This thing goes. Alot of fun to fire. Shoot 1 dart at a time as a rifle or shove 2 in there and still get decent shotgun performance. I'd believe 150fps claims with short darts. i am able to easily switch between long or short darts. I removed air restrictors too which gave it a bump. I Just need to get some rubber to seal between the parts of blaster in middle.