Release the potential of you blaster!  Shoot harder and faster with this wiring and switch DIY kit.  This kit includes all the low resistance 18awg or 16awg wire you need for one blaster, upgraded acceleration/rev switch and battery connector of your choice.  The kit is supplied as individual components only.

This kits is suitable for not only the Stryfe blaster, but other 'semi-auto' blasters eg Modulus Ecs 10, Rayven, Fortnite AR-L Scar, Cam Ecs 12, Fortnite SMG-E, Jyn Erso, Desolator, etc.

This kit will complement those who are competent with electrical circuits and soldering.  This kit is suitable for any Semi-Auto blaster where 1x rev switch is needed.  Stryfe, Swordfish, Rayven, Modulus, Cam, Demolisher, Jyn Erso, Evader etc blasters.

The kit will contain the following:

• All the 18awg or 16awg (your choice) wire you will need for one blaster
• Heat Shrink Tubing
• Upgraded acceleration rev switch (10A or 16A)
• Rubber grommet 
• XT60 connector or Deans connector for battery connection

With this kit installed, depending on motors used, expect increases of 15FPS muzzle velocity (stock motors) to 40FPS muzzle velocity (Xtreme Pro 180's) with with LiPo battery pack.  (stock Stryfe 60-70FPS muzzle velocity).  (Testing performed in a controlled scenario with brand new Elite darts)

Click here for installation instructions: Stryfe Installation Guide Stage 1
Click here for circuit diagram: Stryfe Circuit Diagram
LiPo low voltage alarm: Low Voltage Alarm
Recommended battery pack 3S LiPo: 3S LiPo Battery Pack (Use with Battery Tray Expander, sold separately)
Recommended battery pack 2S LiPo: 2S LiPo Battery Pack (Use with Battery Tray Expander, sold separately)
Recommended battery charger: Battery Charger You will need to purchase battery charger power supply, as well as female Deans to male XT60 adaptor Deans XT60 connector

Battery tray expander sold separately.  Stryfe Battery Tray Expander
180 motor cover sold separately (if using 180 sized motors).  Stryfe 180 Motor Cover
We recommend using Worker Flywheels sold separately.  Worker Lightweight Flywheels

Important Safety
Blasters are modified at your own risk.  BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster.  BlasterTECH will not accept any liability for injury caused during or after modification.  The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older.  Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face.  Always use foam darts.  By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.