Please fully read the product description and look at photos before purchase.  We've added a lot more information recently since we've received the shipment and had the chance to use/experience the Inverted Scales Blaster.

The Inverted Scale 2.0 Blaster (AKA NiLin) is a semi/full auto AEG/AEB Automatic Electric Blaster.  The blaster uses several types of metal for the internals and the blaster shell is made out of Dupont Nylon. The T238 control board makes it possible to fire in both semi-auto and full-auto mode. 

Performance of around 220-230 fps with the installed 180mm length barrel, 240-250 fps with the included 350mm length barrel. 

This newly improved 2.0 version has a machined aluminum magwell that allows it to be rotated from a traditional downward direction to 45 degrees and 90 degrees to the side (see photo) on both left and right sides.  Threaded barrel so you can have easier barrel swap

The package comes included (as per photos) with Inverted Scales barrel shroud, and buffer tube/adjustable stock a 15-round XYL unicorn mag (also compatible with worker straight talon magazines).  Lipo battery is not included however is required (see related products below). 

This blaster uses the 'wide' size Inverted Scales 3s lipo that fits inside the 3d printed short/stubby stock using a XT30 connector.  If your wanting to use the Buffer Tube then use the 'thin' size Inverted Scales 3s lipo (the 'wide' version lipo will not fit in the buffer tube).  Top picatinny rail that runs the length of blaster.  The Inverted Scales 2.0 Blaster is a very awesome and fun blaster to use.  Blaster is ready to run, load up your darts, charge/hook up your battery and go!

You can switch between semi auto firing (switch in forward position), debug unjam deprime mode (switch in middle position) and full auto firing (switch in rear position).

The The Inverted Scale 2.0 Blaster package includes:
-  Inverted Scale 2.0 Blaster
-  Threaded 180mm long, 16 OD, 12.9 ID barrel (installed in blaster)
-  Threaded 350mm long, 16 OD, 12.9 ID barrel also included
-  3d printed short/stubby stock (installed on blaster) (use 'wide' Lipo)
-  Buffer tube & adjustable shoulder stock also included (use 'thin' Lipo)
-  Nylon barrel shroud also included with non-threaded barrel
-  15 dart capacity magazine
-  Extra spring which we think is just a spare one
-  Lipo Battery and charger NOT INCLUDED but requried.  Darts not included.

Optional extras for the Inverted Scale 2.0 Blaster (see related products below (scroll down to bottom)):
- Only available in one colour - Green
- Extra Magazines Unicorn or Worker Straight magazines
- 3s Lipo ('Wide' size specific for the blaster (fits in short/stubby stock))
- 3s Lipo ('Thin' size specific for the blaster (fits in buffer tube))
- Lipo battery charger
- Short darts

Deans notes: 
-Avoid dry fire (firing blaster without any dart in chamber/magazine).  Be consious and check how many darts are in your magazines.  Dry firing will break/kill/ruin any blaster.

-Use new/firm darts with this blaster.  What we noticed is some jams due to the very fast pusher speed.  Old/soft/worn darts cause the dart to fold and jam.

-Do not put any fingers (or other bits haha) in the jam door/pusher area.  The pusher speed is very fast and could lop off something.  No seriously please be carefull.  If you experience any jams, visually look in the jam door/pusher area.  If there is a jam, put the switch in debug mode (switch in middle position), then tapping the firing trigger the pusher will step backwards openeing the breech/pusher so you can remove the jamed dart.

-The blaster come fully assembled with the metal magwell and 3d printed short/stubby stock.  The blaster package also comes included with they nylon barrel shroud, to install this the metal articulated magwell needs to be removed.  Same with the stock, to install the buffer tube/adjustable stock the 3d printed short/stuffy stock needs to be removed.  Remember though - 'thin' lipo for buffer tube, 'wide' lipo for short/stubby stock.

-Use the debug mode (switch in middle position) to deprime the blaster.  You will hear the blaster fire when you tap the trigger.

-This blaster is very 'realistic looking' and is a 'imitation firearm'.  In the public eye this WILL BE SEEN AS A REAL FIREARM, therfore NEVER USE IN PUBLIC AREAS - only to be used in your own private area.  This is for you own safety.  Ensure you think before use and use some good comon sense before using or purchasing from us.  Do not be stupid or silly using this or any other blaster.




Not suitable for children due to high power.  Always wear safety glasses when using blasters and play responsibly.


Due to international shipping costs and international customs restrictions, this item is only available to Australian residents/addresses.



Important Safety
Blasters are modified at your own risk.  BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster.  BlasterTECH will not accept any liability for injury caused during or after modification.  The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18 years or older.  Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts.  By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.