Default Language Pack (us-en)
Worker Black Angled Grooved Lightweight Flywheels
W0230
Worker Black Angled Grooved Lightweight Flywheels
Worker Black Angled Grooved Lightweight Flywheels upgrade:
CNC machining curvature and ridges enhance power transfer to darts. lightweight plastic material promotes flywheels spinning acceleration.
These flywheels have a concave surface to allow more contact to the dart. They also have a angled grooved toothed surface to grip the dart more. They show to work well with upgraded blasters maximising Flywheel grip on the dart allowing more power transfer and therefore higher velocities. These angled grooved flywheels are slightly larger in diameter than the White wheels resulting in higher dart velocity. They also have special angled groves.
W0230 Plastic
Inner (root) Diameter: 34.7mm
Outer Diameter: 35.8mm
Weight: 6.21g
Sold as a set/pair (2x flywheels).
Please note. These Rapidstrike/Stryfe flywheels are compatible Worker Flywheel Cages and all OFP (Open Flywheel Project) cages for all blasters.
When installing/pushing flywheels on to motor shaft, ensure (see photos):
-Middle of flywheel is supported (pushing on outside of wheel will break it)
-Bottom of motor is supported
-Wheels are not pushed on too far as to rub against cage (its much easier to push wheels on and very hard to pull back off) (Wheel rubbing on cage will cause component failure ie motor burn out)
-Once installed use fingers to ensure wheels spin freely and there is no friction/rubbing
- 'Multigrip Pliers' are an excellent tool for flywheel installation
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
CNC machining curvature and ridges enhance power transfer to darts. lightweight plastic material promotes flywheels spinning acceleration.
These flywheels have a concave surface to allow more contact to the dart. They also have a angled grooved toothed surface to grip the dart more. They show to work well with upgraded blasters maximising Flywheel grip on the dart allowing more power transfer and therefore higher velocities. These angled grooved flywheels are slightly larger in diameter than the White wheels resulting in higher dart velocity. They also have special angled groves.
W0230 Plastic
Inner (root) Diameter: 34.7mm
Outer Diameter: 35.8mm
Weight: 6.21g
Sold as a set/pair (2x flywheels).
Please note. These Rapidstrike/Stryfe flywheels are compatible Worker Flywheel Cages and all OFP (Open Flywheel Project) cages for all blasters.
When installing/pushing flywheels on to motor shaft, ensure (see photos):
-Middle of flywheel is supported (pushing on outside of wheel will break it)
-Bottom of motor is supported
-Wheels are not pushed on too far as to rub against cage (its much easier to push wheels on and very hard to pull back off) (Wheel rubbing on cage will cause component failure ie motor burn out)
-Once installed use fingers to ensure wheels spin freely and there is no friction/rubbing
- 'Multigrip Pliers' are an excellent tool for flywheel installation
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
50.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
(write review)
3/5
Decent.
Having used Workers 'straight' grooved Worker Flywheels in the past, I decided to try these.
As a replacement, they are good, and well priced, but the straight grooved flywheels, which are the same price offer better performance.
Id recommend these to someone who wants an affordable flywheel upgrade and wants/needs low dart wear.
For the performance enthusiast who doesn't mind/care about dart wear, Workers straight grooved flywheels are better.