Default Language Pack (us-en)
Phoenix Worker White Angled Grooved Flywheels
W0593
Phoenix Worker White Angled Grooved Flywheels
Upgrade White Angle Groved Flywheels for your Worker Phoenix Blaster. Larger diameter wheels, concave and angled grooved surface provides extra crush and grip, resulting in increased power and dart velocity. These Upgrade Wheels along with the Upgrade Worker Phoenix Silver motors will add some more sting to your Phoenix blaster.
W0593 Plastic
Inner (root) Diameter: 26.5mm
Outer Diameter: 27.7mm
Weight: 4g
Sold as a set/pair (2x flywheels).
These Flywheels are designed to work with the Worker Phoenix Blaster to be used with the Worker Phoenix Silver upgrade motors.
When installing/pushing flywheels on to motor shaft, ensure (see photos):
-Middle of flywheel is supported (pushing on outside of wheel will break it)
-Bottom of motor is supported
-Wheels are not pushed on too far as to rub against cage (its much easier to push wheels on and very hard to pull back off) (Wheel rubbing on cage will cause component failure ie motor burn out)
-Once installed use fingers to ensure wheels spin freely and there is no friction/rubbing
- 'Multigrip Pliers' are an excellent tool for flywheel installation
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
30.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
(write review)
5/5
Definitely buy a set
These are great flywheels for the phoenix, If you put them on the last stage (I used merlins motors for last stage) it will put you in 175fps range. I ended up putting 3 sets of these flywheels on with the first stage neo badgers, second and third stages merlin on 3s and I achieved 210fps with an average of 195fps @15dps. A good improvement from the original set up