Default Language Pack (us-en)
Hurricane Worker Black Angled Grooved Flywheels
W0372
Hurricane Worker Black Angled Grooved Flywheels
Upgrade Black Angle Groved Flywheels for your Worker Hurricane. Larger diameter wheels, concave and angled grooved surface provides extra crush and grip, resulting in increased power and dart velocity (upgrade mods including motors are recomended). These wheels can turn your Hurricane in to a little beast of a blaster!
W0372 Plastic
Inner (root) Diameter: 25.6mm
Outer Diameter: 26.9mm
Weight: 3.32g
These Flywheels works with the Worker Hurricane Blaster: Worker Hurricane Blaster
Please note. These flywheels are only for Worker Hurricane blaster.
When installing/pushing flywheels on to motor shaft, ensure (see photos):
-Middle of flywheel is supported (pushing on outside of wheel will break it)
-Bottom of motor is supported
-Wheels are not pushed on too far as to rub against cage (its much easier to push wheels on and very hard to pull back off) (Wheel rubbing on cage will cause component failure ie motor burn out)
-Once installed use fingers to ensure wheels spin freely and there is no friction/rubbing
- 'Multigrip Pliers' are an excellent tool for flywheel installation
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
W0372 Plastic
Inner (root) Diameter: 25.6mm
Outer Diameter: 26.9mm
Weight: 3.32g
Technical Information relating to Hurricane flywheel cage:
Stock Hurricane flywheel cage motor shaft to shaft distance = 35mm
Stock flywheels & Stock cage:
Route diameter = 24.4mm
Outer diameter = 25.4mm
Flywheel gap of = 10.6mm
Black angle groved flywheels & Stock cage
Route diameter = 25.6mm
Outer diameter = 26.9mm
Flywheel gap of = 9.4mm
Black angle groved flywheels and our 34mm cage (120fps with decent darts)
Route diameter = 25.6mm
Outer diameter = 26.9mm
Flywheel gap of = 8.4mm
These Flywheels works with the Worker Hurricane Blaster: Worker Hurricane Blaster
Please note. These flywheels are only for Worker Hurricane blaster.
When installing/pushing flywheels on to motor shaft, ensure (see photos):
-Middle of flywheel is supported (pushing on outside of wheel will break it)
-Bottom of motor is supported
-Wheels are not pushed on too far as to rub against cage (its much easier to push wheels on and very hard to pull back off) (Wheel rubbing on cage will cause component failure ie motor burn out)
-Once installed use fingers to ensure wheels spin freely and there is no friction/rubbing
- 'Multigrip Pliers' are an excellent tool for flywheel installation
Important Safety
Blasters are modified at your own risk. BlasterTECH will not accept any liability for damage or reduction of lifespan of your blaster. BlasterTECH will not accept any liability for injury caused during or after modification. The items on this site are safe as long as the operator uses it safely. The items on this site are to be used by those 18years or older. Always wear protective eye wear whilst using blasters. Never point or aim at someone's eyes or face. Always use foam darts. By purchasing these items you will use it in a safe and responsible manner and you agree that BlasterTECH will not be liable for any injury caused by misuse or accidental usage.
weight:
30.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
No Reviews Posted Yet - be the first! (write review)